-
SS904L AISI 904L Stainless Steel (UNS N08904)
UNS NO8904, commonly known as 904L, is a low carbon high alloy austenitic stainless steel which is widely used in applications where the corrosion properties of AISI 316L and AISI 317L are not adequate. 904L provides good chloride stress corrosion cracking resistance, pitting resistance, and general corrosion resistance superior to 316L and 317L molybdenum enhanced stainless steels.
-
Monel 400 Alloy (UNS N04400/ W.Nr. 2.4360 and 2.4361 )
Monel 400 alloy is a nickel copper alloy which has high strength over a wide temperature range up to 1000 F. It is regarded as being a ductile Nickel-Copper alloy with resistance to a wide variety of corrosive conditions.
-
INCOLOY 825 (UNS N08825 / NS142)
Alloy 825 is an austenitic nickel-iron-chromium alloy also defined by additions of molybdenum, copper and titanium. It was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.
-
INCONEL 600 (UNS N06600 /W.Nr. 2.4816 )
INCONEL alloy 600 (UNS N06600) A nickel-chromium alloy with good oxidation resistance at higher temperatures. With good resistance in carburizing and chloride containing environments. With good resistance to chloride-ion stress corrosion cracking corrosion by high-purity water, and caustic corrosion. Alloy 600 also has excellent mechanical properties and has a desirable combination of high strength and good workability. Used for furnace components, in chemical and food processing, in nuclear engineering and for the sparking electrodes.
-
INCONEL 625 (UNS N06625 / W.Nr.2.4856)
Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium. The addition of molybdenum acts with the niobium to stiffen the alloy matrix, providing a high strength without a strengthening heat treatment. The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. Alloy 625 is used in chemical processing, aerospace and marine engineering oil & gas, pollution control equipment and nuclear reactors.
-
MP(Mechanical Polishing) Stainless Seamless Pipe
MP (Mechanical polishing): is commonly used for the oxidation layer, holes, and scratches on the surface of steel pipes. Its brightness and effect depend on the type of processing method. In addition, mechanical polishing, although beautiful, can also reduce corrosion resistance. Therefore, when used in corrosive environments, passivation treatment is required. Moreover, there are often polishing material residues on the surface of steel pipes.
